Joseph Engineering Services
Book a discovery call
Federated BIM model, mixed-use development

Systematized BIM services in Amsterdam.

Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.

Explore the pilot programme Get the ISO 19650 template pack
Design-side

For consultants

Housing and reuse packages produced to your ILS and templates, so a lean studio documents like a practice five times its size.

Explore Build-side

For contractors

Coordination and shop drawings for dense-site construction, where logistics, neighbours and the water table all constrain the programme.

Explore Owner-side

For developers

Consistent information across mixed portfolios of new build and conversion, with handover data that holds up in operation.

Explore

Housing targets outpace studio headcount. Capacity can come from outside.

Amsterdam needs homes faster than your studio can responsibly grow, and adaptive reuse makes every project its own puzzle. A production floor sized to each project, modelling new build and conversion alike to the same checked standard.

Prestige One
Al-Futtaim
AECOM
Dar Al-Handasah
Arup
WA International
SCDA
Dezigntechnic
H2R Design
Innovo
M4
MNG
Günal
ALEC
ALEMCO
Voltas
ALEC Fitout
DEPA
Al Tayer Stocks
Abaad Wood
Prestige One
Al-Futtaim
AECOM
Dar Al-Handasah
Arup
WA International
SCDA
Dezigntechnic
H2R Design
Innovo
M4
MNG
Günal
ALEC
ALEMCO
Voltas
ALEC Fitout
DEPA
Al Tayer Stocks
Abaad Wood

Six services. One checked standard.

From housing blocks to warehouse conversions, every deliverable clears the same QA gates and the same ISO 19650 baseline.

BIM Delivery, fully coordinated multidiscipline model

BIM Delivery.

Full-discipline modelling for new build and conversion, coordinated and issued as packages your site team can build from directly.

Explore service
VDC, 4D sequencing and coordinated site logistics model

Virtual Design & Construction.

4D sequencing for constrained inner-city sites, and 5D cost that keeps tight housing budgets honest through design development.

Explore service
CDE workspace

Information Management

CDE operation, naming discipline and exchange management to ISO 19650, so a small studio gets big-office information governance without hiring for it.

Explore
Digital Twins, asset information model of heritage and tower development

Digital Twins

Asset models with structured handover data, built for housing operators who will run these buildings for decades.

Explore
QTO · procurement BOQ

QTO & Cost

Quantities from the coordinated model, so your unit-cost discussions across repeated housing types stay grounded in one number set.

Explore
LiDAR, point cloud scan of industrial facility

As-Built Documentation

Scan to BIM for the reuse pipeline: canal-side fabric, post-war stock and industrial shells measured into reliable models.

Explore

The full scope, project by project

Eight capabilities from a single team, matched to each commission rather than to a retainer.

  • 3D BIM modelling

    Architecture, structure and MEP modelled and federated to one standard, from compact infill plots to full housing blocks.

  • Revit family creation

    Custom Revit content to your standard, including the irregular components reuse projects keep demanding.

  • 4D, 5D and 6D simulation

    4D logistics simulation for tight sites, 5D cost per housing type, and 6D data where your operators request it.

  • Shop drawings & detailing

    Shop drawings coordinated in the model first, so installation in occupied, constrained streets goes to plan.

  • Scan to BIM

    Point clouds of existing buildings processed into as-built models accurate enough to design conversions on.

  • CAD to BIM conversion

    Old drawing sets rebuilt as intelligent models, giving conversion projects a dependable starting point.

  • BIM for facility management

    Structured handover data for housing and commercial operators, ready for CAFM import on day one.

  • Quantity take-off & BOQ

    Model-based take-off across repeated dwelling types, where small measurement errors multiply across hundreds of units.

Three sets of eyes before it leaves.

Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.

Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published

Skip the gates and a lean team pays twice: rework eats the fee, coordination errors surface during installation, and handover data needs rebuilding. The three-signature rule on every JES file is what keeps your margin intact.

Proof at residential scale

Residential towers, hotels and transit programmes coordinated to ISO 19650 in the Gulf. A zero-cost pilot lets you test the method on one package.

View all

What changes when delivery runs to a system

  • Construction-ready output

    Documentation issued to programme from a coordinated model, so your permit deadlines and contractor mobilisations stop competing.

  • Your team stops chasing deliverables

    Live dashboards carry each file's author, checker and approver, so a small office never burns hours on supplier management.

  • Runs to standard

    ISO 19650 stood up from project start, proportionate to the project rather than imposed as bureaucracy.

View all
From LOD 350 to fabrication-ready6 min
Coordination

From LOD 350 to fabrication-ready

Why "coordinated" models still cause site rework, and the handoff that fixes it.

Read
The BEP subcontractors actually follow5 min
Delivery

The BEP subcontractors actually follow

The difference between a filed document and a working agreement is five sections.

Read
Clash detection to zero5 min
Coordination

Clash detection to zero

Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.

Read
QTO as the single source of truth for variations6 min
Cost

QTO as the single source of truth for variations

When quantities come straight from the model, variations stop being arguments and become deltas.

Read
As-built from day one5 min
Handover

As-built from day one

Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.

Read

Common questions about BIM in Amsterdam

Both. JES produces the discipline models, drawings and coordination, and governs the standards: your BEP, CDE and the Author-Checker-Approver gate on every file. A lean Amsterdam studio gets big-office information governance without hiring for it, so you have one accountable team rather than a consultancy that advises and a shop that draws.

Yes. We embed as your outsourced BIM team under one delivery lead, with a production floor sized to each project. Capacity expands and contracts with your pipeline, so housing volume no longer outpaces what your studio can responsibly grow, and new build and conversion clear the same checked standard.

Yes. Our BIM consultants embed in your delivery, set the BEP and LOD schedule, and hold new build and adaptive reuse to one checked standard against ISO 19650. Every conversion puzzle stays inside the same QA gate, with one named lead accountable across housing blocks and warehouse conversions alike.

Yes. We run scan to point cloud to record model for the reuse pipeline, measuring canal-side fabric, post-war stock and industrial shells into a verified base. Every discipline coordinates against that record, so a conversion is designed against the building that stands rather than drawings that no longer match it.

Architectural, structural and MEP, authored in Revit and federated in Navisworks on regular clash cycles for dense inner-city sites. Files are authored, checked and approved against your BEP before issue, where logistics, neighbours and the water table all constrain the programme. You receive packages your site team can build from directly.

Cost follows scope, disciplines, the LOD you need and programme length, so we scope each engagement to the actual work rather than a flat day rate. An adaptive-reuse conversion carries more than a repeated new-build block. See the output and QA first on a zero-cost pilot for one package before you commit budget.

Nearby locations
Help yourself

Get the ISO 19650 Template Pack

The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.

Free download
Talk to us

Book a 30 minute discovery call with our team

We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.

Book a call
Got a project?

One free package, no commitments

We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.

Request a pilot