Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Systematized BIM services in Switzerland.
Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.
Design-side
For consultants
Modelling and documentation packages to your BEP and your openBIM requirements, so your engineers spend their hours on judgement rather than production.
Explore Build-sideFor contractors
Coordinated construction models and shop drawings with the clash record documented, because on your sites the evidence matters as much as the fix.
Explore Owner-sideFor developers
Portfolio information governance with verifiable handover data: structured, validated and traceable to source, ready for long-horizon ownership.
ExploreSwiss production carries Swiss salaries. Offshore production doesn't.
Every model hour produced in-house carries a Swiss salary, and the work still needs checking. Offshore production, audit-grade evidence. 260+ engineers deliver to ISO 19650 with a QA record your auditors can walk file by file.
Six services. One audit trail.
Every deliverable carries its checking history in ERP from model setup to handover, so traceability is a record you query rather than a promise you accept.
BIM Delivery.
Discipline modelling and coordination delivered with IFC exports alongside native formats, fit for openBIM workflows from day one.
Explore service
Virtual Design & Construction.
4D and 5D built on the coordinated model, giving your programme and cost discussions a quantitative footing before construction commits.
Explore service
Information Management
ISO 19650 information management executed precisely: controlled exchanges, defined responsibilities and a CDE that holds your project's single version of truth.
Explore
Digital Twins
Asset models with validated data structures at handover, ready for the long ownership horizons your assets are managed on.
Explore
QTO & Cost
Quantities derived from the model with element-level provenance, so every figure in your cost plan can be traced and defended.
Explore
As-Built Documentation
Scan to BIM with declared accuracy for existing stock, from urban renewal to documentation of long-held assets.
ExploreEight capabilities, each one documented
The full BIM scope under one QA regime, each capability leaving the same evidence trail, so you keep one accountable supplier.
-
3D BIM modelling
Revit production across architecture, structure and MEP, federated and clash-managed, with IFC deliverables for openBIM environments.
-
Revit family creation
Revit families built to your specification with parameter discipline, so data quality starts at the component.
-
4D, 5D and 6D simulation
Programme and cost simulation in 4D and 5D, extended to 6D performance data where your owner's brief requires it.
-
Shop drawings & detailing
Shop drawings issued from the coordinated model with their checking history, at the tolerance your installation work demands.
-
Scan to BIM
Point clouds processed into as-built models with stated accuracy bands, for renewal projects on existing assets.
-
CAD to BIM conversion
Historic 2D documentation rebuilt as coordinated 3D models, preserving the archive while making it usable.
-
BIM for facility management
Handover datasets validated against COBie or your CAFM schema, so operations inherits clean data rather than a cleanup project.
-
Quantity take-off & BOQ
Model-based quantity take-off with full provenance, every measurement traceable from cost line to model element.
Three sets of eyes before it leaves.
Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published
Without the record, failures surface late: undocumented model changes, quantities nobody can reconstruct, handover data that fails validation. JES files carry their evidence with them, three signatures and a timestamp on every deliverable.
Delivered with the audit trail intact
Metro, aviation and museum projects delivered to ISO 19650 in the Gulf, each with its QA history on record and available for review.
DWC Airport
Terminal-scale design packages for Dar Al-Handasah on Dubai World Central's next…
Read the case
Dubai Metro Blue Line
MEP modelled and coordinated across Blue Line stations and depots for MNG Esmas,…
Read the case
Wynn Ras Al Khaima
Over 100 people at peak across MEP, structural and interior fit-out packages on …
Read the case
Stargate Data Centre
Every N+1 and 2N redundancy path verified in 3D against Tier-rating requirements…
Read the case
Zayed National Museum
Mechanical, electrical and plumbing threaded through Foster + Partners' steel-fe…
Read the case
Emaar Golf Hillside Tower
Shop drawing release synced to the tower pour cycle on AFE's fast-track golf-fac…
Read the case
Al Badia
Every consultant and contractor on Al-Futtaim's master-planned villa and low-ris…
Read the caseWhat changes when delivery runs to a system
-
Construction-ready output
Drawings issued from a coordinated, clash-managed model on a schedule you can plan around, with the checking record attached.
-
Your team stops chasing deliverables
You read deliverable status in dashboards: author, checker, approver, timestamp. Nothing about your project lives in someone's inbox.
-
Runs to standard
ISO 19650 configured at the start and maintained throughout, so the audit finds a working system rather than reconstructed paperwork.
6 min
From LOD 350 to fabrication-ready
Why "coordinated" models still cause site rework, and the handoff that fixes it.
Read
5 min
The BEP subcontractors actually follow
The difference between a filed document and a working agreement is five sections.
Read
5 min
Clash detection to zero
Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.
Read
6 min
QTO as the single source of truth for variations
When quantities come straight from the model, variations stop being arguments and become deltas.
Read
5 min
As-built from day one
Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.
ReadCommon questions about BIM in Switzerland
Both. We produce the models, drawings and coordination, and we govern the information through BEP authorship, the CDE and the ISO 19650 gate. One accountable team owns both, not a consultancy advising beside a shop that draws. Moving production offshore only works if the governance travels with it, and here it does, evidence and all.
Yes. A delivery lead owns your programme and embeds in your coordination, backed by 260+ engineers delivering to ISO 19650. Every model hour they produce sits off a Swiss salary base, with a QA record your auditors can walk file by file. Capacity scales with the programme rather than a permanent bench, and one accountable name stays on the contract.
Yes. Our consultants embed in your delivery, author the BEP, hold your LOD and meet your openBIM requirements to ISO 19650. Your engineers spend their hours on judgement rather than production, while the modelling load moves to our floor. One named lead is accountable across the programme, so the standard is held without the in-house cost of every drafting hour.
Yes. We laser scan the existing asset, register the point cloud and produce a coordinated record model that matches what stands. That verified base is what architecture, structure and MEP coordinate against, with the QA history documented and available for review. For refurbishment of Swiss stock, it gives your team an audit-grade record of the building before work starts.
Architecture, structure and MEP, authored in Revit and federated in Navisworks for regular clash cycles on one model. Every file passes the Author-Checker-Approver gate against your BEP, and the clash record is documented alongside it. On your projects the evidence matters as much as the fix, so each package ships to construction tolerance with its QA trail attached.
Scope, disciplines, LOD and programme length drive it, not a flat day rate. A validated multi-discipline model to a high LOD carries more hours than a single package, and we scope each engagement to the actual work. Because the point is production off a Swiss salary base, the clearest test is a zero-cost pilot on one package, QA record included.
Help yourself
Get the ISO 19650 Template Pack
The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.
Free download
Talk to us
Book a 30 minute discovery call with our team
We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.
Book a call
Got a project?
One free package, no commitments
We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.
Request a pilot