Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Systematized BIM services in Vietnam.
Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.
Design-side
For consultants
Production capacity to your BEP for industrial, commercial and residential packages, documented to the standard international clients specify.
Explore Build-sideFor contractors
Trade coordination and shop drawings for fast-moving industrial and high-rise sites, resolved in the model before procurement and fabrication commit.
Explore Owner-sideFor developers
One information standard across your project's consultants and contractors, with handover data an international operator or buyer will accept.
ExploreInternational investors bring their information requirements with them. We deliver to those requirements daily.
Manufacturers and investors building factories, towers and terminals in Vietnam specify the standards their home markets enforce. 260+ engineers, ISO 19650 workflows and an audit trail on every file give Vietnamese teams that delivery capability without building it in-house first.
Six services. One written standard.
Every deliverable for a Vietnamese project clears the same QA gates, ERP tracking and ISO 19650 baseline as our Gulf work, because it comes from the same floor.
BIM Delivery.
Full-discipline modelling, federation and clash resolution, issued at construction tolerance to reduce site queries from the first package.
Explore service
Virtual Design & Construction.
4D and 5D simulation that works through programme and cost in the model, before procurement locks in the consequences.
Explore service
Information Management
CDE setup and operation, naming control and managed exchanges, so the project's information plan is enforced rather than assumed.
Explore
Digital Twins
Asset models structured for operations and CAFM import, with the data industrial owners need to run the facility.
Explore
QTO & Cost
Model-extracted quantities tied to your cost framework, one number for estimators, buyers and the contract.
Explore
As-Built Documentation
Scan-based record models that document the asset as constructed, ready for an investor's technical audit.
ExploreThe whole scope, one purchase order
The full BIM range from a single supplier, so a Vietnamese project gains an international delivery system without assembling one vendor at a time.
-
3D BIM modelling
Revit, Civil 3D and Navisworks across architecture, structure and MEP, one modelling standard on every project.
-
Revit family creation
Custom Revit content built to your LOD requirement, from industrial racking and plant to architectural systems.
-
4D, 5D and 6D simulation
Sequence, cost and performance modelled in 4D, 5D and 6D where the brief requires the data.
-
Shop drawings & detailing
Shop drawings coordinated in the federated model and issued ready for fabrication.
-
Scan to BIM
Scan to BIM conversion for existing plants and buildings entering expansion or retrofit.
-
CAD to BIM conversion
2D legacy drawings rebuilt into coordinated models, giving brownfield industrial sites dependable geometry.
-
BIM for facility management
Operations data structured into the model for CAFM handover, complete at the point of transfer.
-
Quantity take-off & BOQ
Quantity take-off from the model, mapped to your cost codes, consistent from tender to final account.
Three sets of eyes before it leaves.
Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published
Where the gate is missing, the costs follow: programme slip, on-site rework, failed audits and handover data that can't support operations. JES files carry an Author-Checker-Approver record from first issue to handover, the evidence layer international clients in Vietnam specify.
A portfolio delivered under audit
Integrated resorts on the UAE coast and giga-project packages in Saudi Arabia, all run through the delivery system now offered into Vietnam.
DWC Airport
Terminal-scale design packages for Dar Al-Handasah on Dubai World Central's next…
Read the case
Dubai Metro Blue Line
MEP modelled and coordinated across Blue Line stations and depots for MNG Esmas,…
Read the case
Wynn Ras Al Khaima
Over 100 people at peak across MEP, structural and interior fit-out packages on …
Read the case
Stargate Data Centre
Every N+1 and 2N redundancy path verified in 3D against Tier-rating requirements…
Read the case
Zayed National Museum
Mechanical, electrical and plumbing threaded through Foster + Partners' steel-fe…
Read the case
Emaar Golf Hillside Tower
Shop drawing release synced to the tower pour cycle on AFE's fast-track golf-fac…
Read the case
Al Badia
Every consultant and contractor on Al-Futtaim's master-planned villa and low-ris…
Read the caseWhat changes when delivery runs to a system
-
Construction-ready output
Coordinated packages issued from the federated model to programme, fully clash-checked before release.
-
Your team stops chasing deliverables
Author, checker and approver named on every file, with ERP dashboards showing live status to your team.
-
Runs to standard
ISO 19650 from the first exchange: EIR, BEP and CDE configured before modelling starts.
6 min
From LOD 350 to fabrication-ready
Why "coordinated" models still cause site rework, and the handoff that fixes it.
Read
5 min
The BEP subcontractors actually follow
The difference between a filed document and a working agreement is five sections.
Read
5 min
Clash detection to zero
Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.
Read
6 min
QTO as the single source of truth for variations
When quantities come straight from the model, variations stop being arguments and become deltas.
Read
5 min
As-built from day one
Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.
ReadCommon questions about BIM in Vietnam
Both. We produce the models and coordination, and we govern the BEP, CDE and the Author-Checker-Approver gate on one programme. A single delivery lead owns both, so you are not appointing a consultancy to advise and a shop to draw. One ISO 19650 standard holds across every package, the same floor that serves our Gulf work.
Yes. A named lead runs your work as an outsourced BIM team running ISO 19650 workflows, backed by 260+ engineers and an audit trail on every file. Capacity scales with the programme, so factory and terminal work meets its investors' standards without an in-house build first and nothing lands on your payroll.
Yes. Our BIM consultants embed in your delivery, author the BEP and keep an audit trail on every file, so an investor's home-market standard is met from day one. One named lead holds the work to ISO 19650 across the programme, documented to the requirements international clients bring with them into Vietnam.
Yes. We run laser scan to registered point cloud to a coordinated record model for existing plants and buildings entering expansion or retrofit. Every discipline coordinates against that verified base, and the record documents the asset as constructed, ready for an investor's technical audit rather than an assumed condition.
Architectural, structural and MEP. We author them in Revit and federate them in Navisworks with regular clash cycles. We coordinate fast-moving industrial and high-rise sites, checked and approved against the BEP, resolved in the model before procurement and fabrication commit, so site queries fall from the first package issued.
Cost follows scope, disciplines, the LOD you set and programme length, so we scope each engagement to the work rather than a flat day rate. A factory package carries far more than a single high-rise floor. A zero-cost pilot on one package is the risk-free way to see the output and QA first.
Help yourself
Get the ISO 19650 Template Pack
The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.
Free download
Talk to us
Book a 30 minute discovery call with our team
We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.
Book a call
Got a project?
One free package, no commitments
We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.
Request a pilot