Joseph Engineering Services
Book a discovery call
Federated BIM model, mixed-use development

Systematized BIM services in Egypt.

Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.

Explore the pilot programme Get the ISO 19650 template pack
Design-side

For consultants

Design and tender packages produced to your BEP while your senior engineers stay on design intent. Production capacity that holds through the whole package, regardless of staff turnover.

Explore Build-side

For contractors

Coordination and shop drawings across structure, architecture and MEP for large-format sites, with clashes closed in the model before they reach the slab.

Explore Owner-side

For developers

Portfolio-wide information governance: your standards written into the EIR and enforced on every consultant and contractor, district after district.

Explore

Egypt's strongest BIM engineers keep being recruited into the Gulf. Your capacity doesn't have to leave with them.

New-capital districts, coastal developments and national infrastructure all need documentation at once, while senior modellers move abroad. One delivery system, 260+ engineers deep, gives Egyptian teams the same production floor Gulf programmes already use, without competing for the same CVs.

Prestige One
Al-Futtaim
AECOM
Dar Al-Handasah
Arup
WA International
SCDA
Dezigntechnic
H2R Design
Innovo
M4
MNG
Günal
ALEC
ALEMCO
Voltas
ALEC Fitout
DEPA
Al Tayer Stocks
Abaad Wood
Prestige One
Al-Futtaim
AECOM
Dar Al-Handasah
Arup
WA International
SCDA
Dezigntechnic
H2R Design
Innovo
M4
MNG
Günal
ALEC
ALEMCO
Voltas
ALEC Fitout
DEPA
Al Tayer Stocks
Abaad Wood

Six services. One accountable team.

From Cairo to the coast, every deliverable runs through identical QA gates, ERP tracking and an ISO 19650 baseline before it leaves the floor.

BIM Delivery, fully coordinated multidiscipline model

BIM Delivery.

Discipline modelling, federation and clash resolution issued to construction tolerance, so packages reach an Egyptian site fully coordinated.

Explore service
VDC, 4D sequencing and coordinated site logistics model

Virtual Design & Construction.

4D and 5D analysis that tests the programme and the budget in the model, before mobilisation makes every correction expensive.

Explore service
CDE workspace

Information Management

CDE management, naming discipline and exchange control run as a service, so the BEP governs every supplier on the project.

Explore
Digital Twins, asset information model of heritage and tower development

Digital Twins

Asset information models with operations-ready data, structured so the building can be run from the model from the day it opens.

Explore
QTO · procurement BOQ

QTO & Cost

Quantities extracted from the coordinated model and tied to your cost plan, giving the commercial team one dataset across the programme.

Explore
LiDAR, point cloud scan of industrial facility

As-Built Documentation

Scan to record-model verification that documents the building as built and flags deviation while it can still be corrected on site.

Explore

Everything BIM, one team to brief

The full BIM scope handled by a single supplier, so an Egyptian programme runs on one contract instead of three offshore vendors.

  • 3D BIM modelling

    Architecture, structure and MEP production in Revit, Civil 3D and Navisworks under one modelling standard.

  • Revit family creation

    Parametric Revit families built to your LOD specification and your naming rules, from joinery to plant rooms.

  • 4D, 5D and 6D simulation

    Programme in 4D, cost in 5D and performance in 6D, applied where the project brief justifies the data.

  • Shop drawings & detailing

    Shop drawings at construction tolerance, verified against the federated model before issue.

  • Scan to BIM

    Point clouds converted into dependable as-built models for retrofit, extension and record purposes.

  • CAD to BIM conversion

    Flat 2D archives rebuilt as coordinated 3D models, so legacy assets join the same information environment as new ones.

  • BIM for facility management

    Handover data structured for CAFM systems, giving facilities teams a working model from day one of operations.

  • Quantity take-off & BOQ

    Model-based take-off mapped to the cost codes your QS team runs, one number across the programme.

Three sets of eyes before it leaves.

Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.

Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published

Lose the gate and the symptoms appear fast: programme slip, contradictory drawings, audit findings and a handover file the operator can't use. JES deliverables move with a full Author-Checker-Approver record, evidence you can put in front of a client, a lender or an auditor.

Delivered at mega-project scale

Metro systems, giga-projects and landmark cultural buildings across the UAE and Saudi Arabia, all delivered through the system now open to Egyptian programmes.

View all

What changes when delivery runs to a system

  • Construction-ready output

    Issue-ready drawing packages produced from a clash-free federated model and released against the construction programme.

  • Your team stops chasing deliverables

    Every file signed by a named author, checker and approver, tracked in ERP dashboards your team can read at any hour.

  • Runs to standard

    ISO 19650 in place from project setup, so the information structure exists before the first model element does.

View all
From LOD 350 to fabrication-ready6 min
Coordination

From LOD 350 to fabrication-ready

Why "coordinated" models still cause site rework, and the handoff that fixes it.

Read
The BEP subcontractors actually follow5 min
Delivery

The BEP subcontractors actually follow

The difference between a filed document and a working agreement is five sections.

Read
Clash detection to zero5 min
Coordination

Clash detection to zero

Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.

Read
QTO as the single source of truth for variations6 min
Cost

QTO as the single source of truth for variations

When quantities come straight from the model, variations stop being arguments and become deltas.

Read
As-built from day one5 min
Handover

As-built from day one

Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.

Read

Common questions about BIM in Egypt

Both. We produce the models, drawings and coordination, and we govern them through the BEP, the CDE and the gate. That means one accountable team, not a consultancy that advises next to a shop that draws. You get production and standards from the same delivery lead across the programme.

Yes. A delivery lead owns your programme, backed by 260+ engineers on one system, so new-capital districts and coastal work get capacity without competing for the CVs the Gulf is already hiring. The team scales against the programme, with no permanent hire. Senior modellers moving abroad no longer thin the bench mid-package.

Yes. Our BIM consultants embed in your delivery, set the BEP and LOD and hold the work to ISO 19650, with one named lead accountable across the programme. Running on one delivery system keeps standards steady even as staff turnover pulls at the local market. Your senior engineers stay on design intent while we carry the volume.

Yes. We run laser scan to point cloud to a coordinated record model for retrofit, extension and record work. That verified base is what every discipline coordinates against, so the model matches the building as it stands. It gives existing-asset work dependable geometry rather than archive drawings that no longer match.

We model architectural, structural and MEP in Revit, federate in Navisworks and run regular clash cycles on one model. Every file is authored, checked and approved against the BEP before issue, at construction tolerance. On large-format sites, clashes are closed in the model before they reach the slab.

Cost follows scope, disciplines, the LOD you need and programme length, so we scope each engagement to the actual work rather than a flat day rate. A new-capital district carries more than a single coastal development. A zero-cost pilot on one package lets you see the output and the QA gate before you commit.

Nearby locations
Help yourself

Get the ISO 19650 Template Pack

The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.

Free download
Talk to us

Book a 30 minute discovery call with our team

We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.

Book a call
Got a project?

One free package, no commitments

We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.

Request a pilot