Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Systematized BIM services in Lebanon.
Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.
Design-side
For consultants
Production capacity that scales with your workload, so a rebuild deadline or a development surge never forces a permanent hire in a difficult market.
Explore Build-sideFor contractors
Trade coordination and shop drawing volume absorbed offshore, with clashes resolved in the model before they cost time on a site where every input is dear.
Explore Owner-sideFor developers
A single information standard enforced across your consultants and contractors, so every asset in a portfolio hands over with data your operations team can actually use.
ExploreRebuild and private development need capacity without carrying the payroll.
A stretched market makes a permanent BIM department hard to justify, yet rebuild schemes and private development still demand modellers, coordinators and information managers. JES supplies that capacity as a delivered team of 260+ engineers, billed against the packages you send rather than held on your payroll between projects.
Six services. One delivery team.
Each service runs through the same Author-Checker-Approver gates and ERP tracking, against a single ISO 19650 baseline that holds from a single rebuilt block to a mixed-use development.
BIM Delivery.
Coordinated models and construction drawings produced to your BEP across all disciplines, checked before they reach your reviewers.
Explore service
Virtual Design & Construction.
4D and 5D analysis that puts programme and cost questions in front of the team while the sequence and the budget can still be changed cheaply.
Explore service
Information Management
Your CDE, naming protocol and exchange workflows administered day to day, so your information manager governs the project instead of policing uploads.
Explore
Digital Twins
Operational asset models with structured data at handover, built for the FM contract that starts the day construction ends.
Explore
QTO & Cost
Model-based quantities tied to your cost plan, so the QS, the contractor and the client meeting all read from one number.
Explore
As-Built Documentation
Laser-scan verification and record modelling that document what was actually built and what stands of existing structures, not what was once drawn.
ExploreEvery capability, none of the overhead
The whole BIM scope from one team, so adding a service never means onboarding another supplier mid-programme.
-
3D BIM modelling
Full-discipline Revit production with Navisworks federation, run to a single modelling standard your reviewers learn once.
-
Revit family creation
Office-standard Revit families authored to your graphics, parameters and LOD specification, from joinery to plant.
-
4D, 5D and 6D simulation
Sequencing, cost and performance data linked to the model, giving planners and commercial teams one model to work from.
-
Shop drawings & detailing
Shop drawings detailed to fabrication tolerance and checked against the federation before they leave JES.
-
Scan to BIM
Point clouds processed into as-built models for rebuild, refurbishment and retrofit work across existing assets.
-
CAD to BIM conversion
Flat 2D archives converted into coordinated 3D models, so existing buildings get the same single source of truth as new ones.
-
BIM for facility management
Handover data structured for CAFM import, so the building's operating model exists before it is occupied.
-
Quantity take-off & BOQ
Take-off straight from the coordinated model, mapped to your measurement rules and cost codes.
Three sets of eyes before it leaves.
Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published
Without that discipline the costs land where a tight budget feels them most: senior staff checking junior work after hours, rework consuming margin on fee-sensitive jobs, and information gaps surfacing at handover or audit. JES files clear three review stages before they reach your CDE, and the record of who authored, checked and approved each one travels with the file.
The evidence, from Gulf projects
Towers, transit packages and resort programmes delivered in the Gulf on tight schedules, run on the same ISO 19650 system a rebuild or development programme needs. A sample below.
DWC Airport
Terminal-scale design packages for Dar Al-Handasah on Dubai World Central's next…
Read the case
Dubai Metro Blue Line
MEP modelled and coordinated across Blue Line stations and depots for MNG Esmas,…
Read the case
Wynn Ras Al Khaima
Over 100 people at peak across MEP, structural and interior fit-out packages on …
Read the case
Stargate Data Centre
Every N+1 and 2N redundancy path verified in 3D against Tier-rating requirements…
Read the case
Zayed National Museum
Mechanical, electrical and plumbing threaded through Foster + Partners' steel-fe…
Read the case
Emaar Golf Hillside Tower
Shop drawing release synced to the tower pour cycle on AFE's fast-track golf-fac…
Read the case
Al Badia
Every consultant and contractor on Al-Futtaim's master-planned villa and low-ris…
Read the caseWhat changes when delivery runs to a system
-
Construction-ready output
Coordinated, clash-checked packages issued against your programme dates, so review and site time goes to the build rather than to correcting the model.
-
Your team stops chasing deliverables
Deliverable status lives on an ERP dashboard, not in a chain of chasing emails between your office and ours.
-
Runs to standard
ISO 19650 wired in from kick-off, with EIR, BEP and CDE structure agreed before modelling starts.
6 min
From LOD 350 to fabrication-ready
Why "coordinated" models still cause site rework, and the handoff that fixes it.
Read
5 min
The BEP subcontractors actually follow
The difference between a filed document and a working agreement is five sections.
Read
5 min
Clash detection to zero
Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.
Read
6 min
QTO as the single source of truth for variations
When quantities come straight from the model, variations stop being arguments and become deltas.
Read
5 min
As-built from day one
Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.
ReadCommon questions about BIM in Lebanon
Both. We produce the models, drawings and coordination, and we govern them through the BEP, the CDE and the Author-Checker-Approver gate. One accountable team carries the work, not a consultancy advising beside a shop that draws. You get production and standards from the same delivery lead, without carrying a permanent department to do it.
Yes. A delivery lead owns your programme, backed by 260+ engineers on one system, and the team is billed against the packages you send rather than held on payroll between projects. A stretched market makes a permanent BIM department hard to justify, yet rebuild and private development still need capacity. You add it when the work is there and release it when it eases.
Yes. Our BIM consultants embed in your delivery, set the BEP and LOD and hold the work to ISO 19650, with one named lead accountable across the programme. A rebuild scheme gets full coordination without a standing department a difficult market cannot support. Your reviewers govern the project rather than police uploads.
Yes. We run laser scan to point cloud to a coordinated record model for rebuild, refurbishment and retrofit work across existing assets. That verified base documents what actually stands, not what was once drawn, and every discipline coordinates against it. It gives rebuild work reliable geometry on stock where old drawings rarely match.
We model architectural, structural and MEP in Revit, federate in Navisworks and run regular clash cycles on one model. Every file is authored, checked and approved against the BEP before issue, at construction tolerance. On rebuild and private-development work, conflicts are resolved in the model before they cost time on a site where every input is dear.
Cost follows scope, disciplines, the LOD you need and programme length, so we scope each engagement to the actual work rather than a flat day rate. A rebuild scheme carries more than a single private development. A zero-cost pilot on one package lets you see the output and the QA gate before you commit margin on a fee-sensitive job.
Help yourself
Get the ISO 19650 Template Pack
The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.
Free download
Talk to us
Book a 30 minute discovery call with our team
We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.
Book a call
Got a project?
One free package, no commitments
We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.
Request a pilot