Joseph Engineering Services
Book a discovery call
Federated BIM model, mixed-use development

Systematized BIM services in Germany.

Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.

Explore the pilot programme Get the ISO 19650 template pack
Design-side

For consultants

Design packages produced to your BEP across the HOAI phases your appointment covers. Your architects and engineers keep the design decisions; we carry the modelling load.

Explore Build-side

For contractors

Construction models, shop drawings and multi-trade coordination from tender to handover. Clashes get resolved in the model, where they cost hours instead of site days.

Explore Owner-side

For developers

One information standard across every consultant and contractor on your portfolio. Your EIR and BEP enforced through the CDE, with audit evidence at every exchange.

Explore

Germany's mandate set the standard. We supply the capacity.

Since the federal mandate, BIM is the working method on infrastructure and, increasingly, on buildings. One office in Ortenberg, 260+ engineers behind it. Your scope is produced at depth and delivered without adding a single role to your payroll.

Prestige One
Al-Futtaim
AECOM
Dar Al-Handasah
Arup
WA International
SCDA
Dezigntechnic
H2R Design
Innovo
M4
MNG
Günal
ALEC
ALEMCO
Voltas
ALEC Fitout
DEPA
Al Tayer Stocks
Abaad Wood
Prestige One
Al-Futtaim
AECOM
Dar Al-Handasah
Arup
WA International
SCDA
Dezigntechnic
H2R Design
Innovo
M4
MNG
Günal
ALEC
ALEMCO
Voltas
ALEC Fitout
DEPA
Al Tayer Stocks
Abaad Wood

Six services. One system behind them.

Every deliverable passes the same Author-Checker-Approver gates and carries the same ERP record, whichever of the six services your project draws on.

BIM Delivery, fully coordinated multidiscipline model

BIM Delivery.

Architecture, structure and MEP modelled and coordinated to your LOD specification, issued as drawing sets your site team can build from without interpretation.

Explore service
VDC, 4D sequencing and coordinated site logistics model

Virtual Design & Construction.

4D sequencing and 5D cost built from the federated model, so programme risk and budget drift surface in planning rather than in claims.

Explore service
CDE workspace

Information Management

CDE setup, naming conventions and exchange workflows run to ISO 19650, so your information manager governs the project instead of policing file names.

Explore
Digital Twins, asset information model of heritage and tower development

Digital Twins

Asset models structured for operation from handover day, carrying the data your FM contractor needs rather than everything the authoring tool exports.

Explore
QTO · procurement BOQ

QTO & Cost

Quantities taken from the coordinated model and mapped to your cost structure, so estimating, procurement and claims reference one source.

Explore
LiDAR, point cloud scan of industrial facility

As-Built Documentation

Point cloud to record model for existing stock: retrofit, conversion and documentation of buildings that have outlived their drawings.

Explore

The full scope, one supplier

Eight capabilities from one team and one QA system, so your project never coordinates across multiple BIM vendors.

  • 3D BIM modelling

    Multidiscipline Revit and Civil 3D production with Navisworks federation, run to a single modelling standard across every package.

  • Revit family creation

    Parametric Revit families to your LOD and naming specification, from facade components to plant-room equipment.

  • 4D, 5D and 6D simulation

    4D programme simulation and 5D cost on the coordinated model, with 6D performance data where your brief calls for it.

  • Shop drawings & detailing

    Trade shop drawings coordinated against the federated model and issued at construction tolerance, ready for your site office.

  • Scan to BIM

    Scan to BIM for the renovation pipeline: point clouds converted into reliable as-built models for retrofit and conversion work.

  • CAD to BIM conversion

    Archive 2D drawings rebuilt into coordinated 3D models, giving older assets a single current source of truth.

  • BIM for facility management

    Asset data structured to COBie or your CAFM schema at handover, so operations starts with information instead of a search.

  • Quantity take-off & BOQ

    Model-based quantity take-off mapped to your cost codes, keeping tender, procurement and variations on one number.

Three sets of eyes before it leaves.

Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.

Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published

Skip the gate and the costs arrive late, when they are largest: coordination errors found on site, audit findings against the BEP, asset data rebuilt by hand at handover. Every JES file carries an Author-Checker-Approver record you can put in front of your client or your auditor.

Delivered at infrastructure scale

Metro lines, airport terminals and national museums coordinated to ISO 19650 across the Gulf, now delivered into Germany from Ortenberg.

View all

What changes when delivery runs to a system

  • Construction-ready output

    Coordinated drawing sets issued against the programme from a clash-checked federated model. Site queries drop because the answers are already modelled.

  • Your team stops chasing deliverables

    Author-Checker-Approver sign-off on every file, visible in ERP dashboards. You read where each deliverable sits instead of writing chasing emails.

  • Runs to standard

    ISO 19650 structure from kick-off: EIR interpreted, BEP written, CDE configured. The audit trail builds as the project runs.

View all
From LOD 350 to fabrication-ready6 min
Coordination

From LOD 350 to fabrication-ready

Why "coordinated" models still cause site rework, and the handoff that fixes it.

Read
The BEP subcontractors actually follow5 min
Delivery

The BEP subcontractors actually follow

The difference between a filed document and a working agreement is five sections.

Read
Clash detection to zero5 min
Coordination

Clash detection to zero

Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.

Read
QTO as the single source of truth for variations6 min
Cost

QTO as the single source of truth for variations

When quantities come straight from the model, variations stop being arguments and become deltas.

Read
As-built from day one5 min
Handover

As-built from day one

Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.

Read

Common questions about BIM in Germany

Both. We produce the models, drawings and coordination, and we govern the information: BEP authorship, CDE setup and naming run to ISO 19650. One accountable team owns both halves, not a consultancy that advises alongside a shop that draws. Since the federal mandate made BIM the working method, that single line of accountability keeps your infrastructure and building scope moving.

Yes. A delivery lead in Ortenberg owns your programme and embeds in your coordination, backed by 260+ engineers producing your scope at depth. Capacity scales up for the mandate deadlines and back down after, so you meet the standard without adding a permanent role to your German payroll. You get one accountable name on the contract.

Yes. Our consultants embed in your delivery across the HOAI phases your appointment covers, authoring the BEP, holding your LOD and working to ISO 19650. Your architects and engineers keep the design decisions; we carry the modelling load underneath them. One named lead stays accountable across the programme, so the standard the mandate set is met file by file.

Yes. We laser scan the existing building, register the point cloud and turn it into a coordinated record model that matches what actually stands. That verified base is what architecture, structure and MEP coordinate against, which matters for the retrofit and conversion work on stock that has outlived its drawings. The scan removes the guesswork before your team designs into it.

Architecture, structure and MEP, modelled in Revit and federated in Navisworks for regular clash cycles on one model. Every file passes the Author-Checker-Approver gate against your BEP before issue, so drawing sets reach your site team at construction tolerance. Your people build from the output without reinterpreting it, and the inspection record travels with each package.

Scope, disciplines, LOD and programme length drive it. A full arch-structure-MEP model held to a high LOD across a long programme carries more hours than a single-discipline package, so we scope each engagement to the actual work rather than a flat rate. The clearest way to see the output and the QA gate is a zero-cost pilot on one package before you commit.

Nearby locations
Help yourself

Get the ISO 19650 Template Pack

The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.

Free download
Talk to us

Book a 30 minute discovery call with our team

We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.

Book a call
Got a project?

One free package, no commitments

We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.

Request a pilot