Author
Model and documentation produced to the MIDP task card. Self-review against the project QA checklist before submission.
Status: WIP
Systematized BIM services in Madrid.
Production, coordination and governance to ISO 19650, delivered as a full BIM team for consultants, contractors and developers. No internal hire, no management overhead.
Design-side
For consultants
Design development and construction documentation produced on our floor while your studio keeps authorship of the design. Packages arrive reviewed, in your templates.
Explore Build-sideFor contractors
Multi-trade coordination and shop drawing volume absorbed before it buries your technical office. Conflicts are settled in the federated model, not on site.
Explore Owner-sideFor developers
Portfolio-wide information governance: one EIR, one naming convention, one quality bar across every plot, audited through the project rather than found at handover.
ExploreMadrid's consultancies are winning commissions their studios were not staffed for. The production moves to us.
Tower refurbishments, office quarters and large urban schemes are pulling capital-city practices into bigger packages of documentation. JES adds production capacity in weeks, with the Author-Checker-Approver gate on every deliverable and ERP visibility from day one.
Six services. One QA gate.
Each service shares the same review chain, the same ERP visibility and the same ISO 19650 setup, so adding scope never means adding a vendor.
BIM Delivery.
Full-discipline modelling and coordination issued to construction tolerance. A package leaves our floor already federated and clash-resolved.
Explore service
Virtual Design & Construction.
Programme rehearsed in 4D and priced in 5D before works start, so the expensive surprises are found while they are still drawings.
Explore service
Information Management
Your EIR and BEP enforced across the supply chain: CDE administration, exchange checking and naming compliance handled, so your BIM manager directs instead of chasing.
Explore
Digital Twins
Digital handover built for operations. Asset data structured to load into your FM platform on day one of occupancy.
Explore
QTO & Cost
Model-derived quantities aligned to your cost plan, so procurement, valuations and variations reference a single auditable source.
Explore
As-Built Documentation
Laser scanning processed into record models that document what was built and flag what deviated.
ExploreEight capabilities, one accountable team
Everything a programme needs from the model side, delivered by one supplier rather than assembled vendor by vendor.
-
3D BIM modelling
Architecture, structure and MEP modelled in Revit under a single standard, with Navisworks federation as the default.
-
Revit family creation
Office-standard Revit families created and maintained for you, parametric where it pays, at the LOD your specification calls for.
-
4D, 5D and 6D simulation
Construction sequencing in 4D, cost modelling in 5D and performance overlays in 6D when the project warrants them.
-
Shop drawings & detailing
Fabrication-level shop drawings checked against the federated model, so the workshop cuts from coordinated geometry.
-
Scan to BIM
Existing buildings captured by point cloud and rebuilt as reliable as-built models for retrofit design.
-
CAD to BIM conversion
Decades of 2D archive converted into structured 3D models that your current projects can reference.
-
BIM for facility management
Handover information organised around operations: asset codes, warranties and maintenance data in CAFM-ready form.
-
Quantity take-off & BOQ
Take-offs generated from the model under your measurement convention, keeping the cost plan tied to the design as it moves.
Three sets of eyes before it leaves.
Every JES deliverable moves through a fixed Author-Checker-Approver gate, tracked in the CDE. The same standard whether it's engineer 3 or engineer 250.
Checker
Independent review against the BEP and federated model. Defects logged, deviation report returned to Author.
Output: Deviation report
Approver
Signed off against EIR and LOIN. Promoted from WIP to Shared or Published in the CDE.
Status: Published
Without that gate, documentation slips behind the programme, trades clash in the riser, the BEP fails its audit and the FM team inherits a model it cannot use. On a tower those failures surface in the most expensive phase. JES prevents them with named accountability on every file, tracked in ERP before anything is issued.
Delivered at metro scale
Gulf metro packages, museum-grade structures and resort programmes, each carried to handover under ISO 19650. The portfolio below is the reference.
DWC Airport
Terminal-scale design packages for Dar Al-Handasah on Dubai World Central's next…
Read the case
Dubai Metro Blue Line
MEP modelled and coordinated across Blue Line stations and depots for MNG Esmas,…
Read the case
Wynn Ras Al Khaima
Over 100 people at peak across MEP, structural and interior fit-out packages on …
Read the case
Stargate Data Centre
Every N+1 and 2N redundancy path verified in 3D against Tier-rating requirements…
Read the case
Zayed National Museum
Mechanical, electrical and plumbing threaded through Foster + Partners' steel-fe…
Read the case
Emaar Golf Hillside Tower
Shop drawing release synced to the tower pour cycle on AFE's fast-track golf-fac…
Read the case
Al Badia
Every consultant and contractor on Al-Futtaim's master-planned villa and low-ris…
Read the caseWhat changes when delivery runs to a system
-
Construction-ready output
Issue-ready drawing sets pulled from a federated model that has already passed clash detection. Site RFIs drop because contradictions were caught upstream.
-
Your team stops chasing deliverables
Live ERP dashboards replace the chase. You see which deliverable sits with which checker without sending a follow-up.
-
Runs to standard
ISO 19650 applied from kickoff: information requirements mapped, BEP written, CDE configured.
6 min
From LOD 350 to fabrication-ready
Why "coordinated" models still cause site rework, and the handoff that fixes it.
Read
5 min
The BEP subcontractors actually follow
The difference between a filed document and a working agreement is five sections.
Read
5 min
Clash detection to zero
Zero hard-clash is table stakes. Here is the tolerance standard we hold a federated model to before sign-off.
Read
6 min
QTO as the single source of truth for variations
When quantities come straight from the model, variations stop being arguments and become deltas.
Read
5 min
As-built from day one
Retrofitting an as-built at practical completion is a tax. Updating it weekly is a habit.
ReadCommon questions about BIM in Madrid
Both. We produce the full-discipline models and drawings and we govern the standards: your EIR and BEP enforced across the supply chain, the CDE administered, exchanges checked. One accountable team runs both, so your BIM manager directs instead of chasing. You are not stitching together a consultancy that advises and a separate shop that draws.
Yes. You get a dedicated outsourced BIM team under one named lead that absorbs the documentation your tower refurbishments and large urban schemes generate before it buries your technical office. Capacity is added in weeks and scales with the commission. Every deliverable clears the Author-Checker-Approver gate, tracked in the ERP from day one.
Yes. Our consultants embed in your delivery, set the BEP and LOD schedule and hold the work to ISO 19650 across every plot and supplier. One named lead stays accountable across the programme. The gate sits on every deliverable and the review chain is visible in the ERP before anything is issued, so nothing surfaces late.
Yes. We capture existing buildings by laser scan, register the point cloud and rebuild it into a coordinated record model that documents what was built and flags what deviated. Architectural, structural and MEP coordinate against that base. On a tower refurbishment it gives your retrofit design a reliable existing condition to work from.
Architectural, structural and MEP. We author them in Revit and federate them in Navisworks with regular clash cycles on one model, authored, checked and approved against the BEP before issue. Multi-trade conflicts are settled in the federated model rather than on a capital-city site, where on a tower those failures would surface in the most expensive phase.
Cost follows scope, the disciplines involved, the LOD you need and the programme length, so we scope each engagement to the actual work rather than a flat rate. A tower refurbishment carries more than a single office quarter. The zero-cost pilot on one package lets you test the gate and the ERP visibility first.
Help yourself
Get the ISO 19650 Template Pack
The full ACA framework PDF, the Responsibility Matrix template, and the EIR / BEP checklist we use on every project.
Free download
Talk to us
Book a 30 minute discovery call with our team
We'll walk you through a live ERP dashboard from an active project and you'll walk away with our ACA template, whether or not we work together.
Book a call
Got a project?
One free package, no commitments
We run the ACA framework on a single package. You get ERP visibility from day one. Zero-cost pilot, capped scope, clear exit.
Request a pilot